PERFORATED BAR
Dimensional Range
- Diameters of 26.9 mm to 812.8 mm.
- Thickness of 6.3 mm to 100 mm.
| Standards | Steels |
|---|---|
| EN-10297 – EN-10210 | E355 – S355J2H – E470 |
| EN-10294 / NFA 49312 | E355K2 – E590K2 |
Large Dimensions
- External diameters of 711.2 mm to 762.0 mm and 812.8 mm.
- Thickness of 6.3 mm to 100 mm.
| Standards | Steels |
|---|---|
| EN-10297 – EN-10210 | E355 – S355J2H |
SEAMLESS PIPING
Dimensional Range
- Diameters of 10.2mm to 165.1 mm.
- Diameters from 10.2mm to 558.8 mm
- Diameters from 10.2 mm to 165.1 mm
| Standards | Steels |
|---|---|
| DIN 2440 | ST-33.2 |
| DIN 2448 | ST-37.2 |
| DIN 1629/DIN 2441 | ST-33.2 |
CALIBRATED TUBE
Dimensional Range
- Outside diameter of 4 mm to 305 mm.
- Thickness of 1 mm to 25 mm.
Finishes
- “BK” – “BK+S” – “GBK” – “BKW”
| Standards | Steels |
|---|---|
| Seamless EN10305-1 (old DIN-2391) | E355/E235 |
OLEODINAMIC CIRCUIT PIPE
Dimensional Range
- Outside diameter ø 4 mm to ø 100 mm.
- Thickness of 0.5 mm to 10 mm.
Finishes
- Normalized and phosphated, black finish "NBK"
- Normalized and zinc plated, white finish "NBK"
| Standards | Quality |
|---|---|
| Seamless EN10305-4 (DIN-2391) | E253 (ST-37.4) malleable and flareable |
* (bonderized treatment, supports bending in the cold)
Structural steel tubing
Dimensional Range
- Sections of 30×30 mm to 500×500 mm.
- Sections of 50 x 30 mm to 600 x 400 mm.
- Thicknesses of 3 mm to 20 mm.
- Circular of 5 mm to 10 mm.
- 5 mm thickness to 100mm.
* Other (greater) dimensions JUMBO on demand, minimum quantities.
| Standards | Steels |
|---|---|
| EN-10210 (hot forming) | S355J2H (standard) / S275JOH / S235JR |
| EN-10219 (cold forming) | S355NH. y offshore EN10225 : S355G13+N, S355G15+N y S355G15+Q. |
*Commercial lengths of 6 or 12 meters.
HOT ROLLED PROFILES
| Standards | ||
|---|---|---|
| Dimensional | Tolerances | |
| UPN de 80 a 400 | UNE-36522-72 | UNE-36522-72 |
| IPN de 80 a 600 | UNE-36521-96 | UNE-EN 10024-95 |
| IPE de 80 a 750 | UNE-36526-94 | UNE-EN 10034-94 |
| HEA de 100 a 1000 | UNE-36524-94 | UNE-EN 10034-94 |
| HEB de 100 a 1000 | UNE-36524-94 | UNE-EN 10034-94 |
| Angles | UNE-EN 10056-1 | UNE-EN 10056-2 |
Reviews
There are no reviews yet.